Description

The PID-03 (and its larger brother the PID-04) are unique in that they can be disassembled into component parts in the field. This allows them to be broken into smaller separate loads for man-pack, animal-pack, helicopter transport or small boat deployment. It also allows the units to be fitted with multiple drums (and thus multiple cables), saving the expense of multiple winches for multiple applications. The PID-03M can be configured as a manual winch with two different gearbox options or as a motorized direct-drive winch.

Applications:

Water sampling, environmental and pipe line monitoring, lightweight grab samplers, small capture nets, subsea video, CTD profiling.

Motor Variants:

  • 0.5 HP to 2.0 HP permanent magnet motor @ 90/180 VDC with regenerative drive controller powered from 110/220 VAC single phase (generator, inverter or ship's power) 
  • 0.125 HP to 1 HP permanent magnet motor @ 12/24/48 VDC with PWM drive controller powered from 12-48 VDC batteries

*** When inquiring, please specify: cable diameter and length (cable specification sheet if possible), payload weight and type, operational conditions ***

Features:

  • Nominal frame dimensions are 27"/69 cm L x 20.5"/52 cm W x 23.5"/60 cm H - (24.5"/63 cm W including mounting pads at bottom)
  • With 16"/41 cm drum flange diameter, overall height is approximately 37"/94 cm
  • Nominal weight 210 to 285 lbs (95 to 130 kg) without cable, depending on motor and gearbox selected
  • Removable carrying handles; two person portable
  • Manual drive versions are available with 2- or 3-speed gearboxes with gear ratios to meet OSHA turning load limits
  • Manual drive gearboxes can be driven by gas or electric drills using separate adapter
  • Electric drive motor controllers are available with 10 foot (3 meter) or 50 foot (15 meter) control cables
  • Electric drive dual motor controllers are available (local master/remote slave configuration)
  • Optional positive action dog clutch allows free-wheeling for towing and paying out of line
  • Torque adjustable manual disc brake for towing
  • Shear pin lock for drum locking during towing or maintenance
  • Drum capacity dependent on core and flange selection, e.g. 250m of 6.35 mm cable, 60m of 11 mm sidescan cable
  • Slip ring ready - two to twelve conductor slip rings are available as standard, others available for custom mountings
  • Load capabilities: variable dependant on power option selected (nominal maximum 75 Kg, typical 20-50 kg)
  • Watertight sub-sea connectors used on all connections except 110/220 VAC, which is provided as wires for customer termination
  • Wooden shipping and storage box

 

 

Video:
Gallery:
responsive lightbox